Texas Instruments 的 DRV8305-Q1EVM User Guide 規格書

l TEXAS INSTRUMENTS (SLVSD12)
1
SLVUAQ4A–April 2016–Revised April 2016
Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated
DRV8305-Q1 Evaluation Module
MotorWare, InstaSPIN-FOC, Code Composer Studio are trademarks of Texas Instruments.
All other trademarks are the property of their respective owners.
User's Guide
SLVUAQ4A–April 2016–Revised April 2016
DRV8305-Q1 Evaluation Module
This document is provided with the DRV8305-Q1 customer evaluation module (EVM) as a supplement to
the DRV8305-Q1 (SLVSD12) data sheet. It details the hardware implementation of the EVM and how to
use the DRV8305-Q1EVM with TI's MotorWare™ software repository.
Contents
1 DRV8305-Q1EVM ........................................................................................................... 2
1.1 Board Overview ..................................................................................................... 2
1.2 Jumper Settings and Test Points ................................................................................. 3
2 Demo Application ............................................................................................................ 4
2.1 Hardware Setup..................................................................................................... 4
2.2 MotorWare (InstaSPIN-FOC) Setup.............................................................................. 5
2.3 InstaSPIN Universal GUI .......................................................................................... 9
3 DRV8305-Q1EVM.......................................................................................................... 13
3.1 DRV8305-Q1EVM Schematics .................................................................................. 13
3.2 DRV8305-Q1EVM Bill of Materials.............................................................................. 17
List of Figures
1 Board Key Components..................................................................................................... 2
2 Block Diagram................................................................................................................ 2
3 Board Jumpers and Test Points ........................................................................................... 3
4 Board Jumpers and Test Points ........................................................................................... 5
5 MotorWare Software Home Page ......................................................................................... 5
6 DRV8305-Q1EVM MotorWare Additions ................................................................................. 6
7 DRV8305-Q1EVM Hal Board Files........................................................................................ 6
8 Copied DRV8305-Q1EVM Hal Board Files............................................................................... 7
9 DRV8305-Q1EVM Solutions Board Files................................................................................. 7
10 Copied DRV8305-Q1EVM Solutions Board Files ....................................................................... 8
11 CCS Import ................................................................................................................... 9
12 Binary (.out) File Location................................................................................................. 10
13 Place Binary (.out) File With GUI ........................................................................................ 10
14 Rename Binary (.out) File................................................................................................. 10
15 Launch GUI ................................................................................................................. 11
16 Enable Motor Identification................................................................................................ 11
17 Enable Motor................................................................................................................ 11
18 DRV8305 SPI Registers................................................................................................... 12
19 DRV8305-Q1EVM Emulator Schematic................................................................................. 13
20 DRV8305-Q1EVM MCU DRV Schematic............................................................................... 14
21 DRV8305-Q1EVM Power Schematic.................................................................................... 15
22 DRV8305-Q1EVM Bridges Schematic .................................................................................. 16
l TEXAS INSTRUMENTS 1 INSTRUMENTS ‘ >i~ u sure) WARNING \ \ \ \ 4—H \ \ \
Emulation Control Power
USB
UART
JTAG
TMS320F28027F-Q1TMS320F28027F-Q1 DRV8305-Q1 3-Phase Motor
Drive-Stage
DRV8305-Q1EVM
www.ti.com
2SLVUAQ4A–April 2016–Revised April 2016
Submit Documentation Feedback
Copyright © 2016, Texas Instruments Incorporated
DRV8305-Q1 Evaluation Module
1 DRV8305-Q1EVM
1.1 Board Overview
The DRV8305-Q1EVM is a fully functional, 3-phase brushless DC (BLDC) motor drive and control
evaluation platform designed for 12-V systems. It is designed to highlight the DRV8305-Q1, a 3-phase
BLDC motor gate driver for automotive applications. It supports a 4.4- to 45-V operating voltage range and
can deliver up to 25 A to the motor.
Figure 1. Board Key Components
WARNING
Hot surfaces include the power MOSFETs (Q3-Q8), power sense
resistors (R74-77), and areas around them.
Figure 2. Block Diagram
I TEXAS INSTRUMENTS :TEXAs ‘ INSTRUMENTS . n ‘... 3H, , . ’ unuaausimiun
www.ti.com
DRV8305-Q1EVM
3
SLVUAQ4A–April 2016–Revised April 2016
Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated
DRV8305-Q1 Evaluation Module
1.2 Jumper Settings and Test Points
The DRV8305-Q1EVM has a variety of jumpers and test points to help interface with the EVM and modify
its functionality.
The following numbered list correspond with the labels in Figure 3:
Figure 3. Board Jumpers and Test Points
1. Emulator interface (R8–R14,J1–J3) and 3.3 V select (J3)
• The R8–R14 0-Ωresistors and J1–J3 jumpers allow the XDS100v2 emulator circuitry to be
completely disconnected from the rest of the evaluation module.
• Use the J3 jumper to select the source of the 3.3-V power supply to the evaluation module. By
default, this is selected for the LDO option, which derives power from the main power supply. Set
to the USB option to allow for firmware debugging without the main power supply.
2. C2000 Boot Select (J5)
Use the J5 jumper to select the boot option for the C2000 microcontroller. By default, this is set for
DEBUG mode.
l TEXAS INSTRUMENTS
Demo Application
www.ti.com
4SLVUAQ4A–April 2016–Revised April 2016
Submit Documentation Feedback
Copyright © 2016, Texas Instruments Incorporated
DRV8305-Q1 Evaluation Module
3. Push Button Option (J6)
Use the J6 jumper to select the functionality of the onboard push button (S1). By default this is
set for the RST mode which ties the push button to the C2000 reset pin. This may be set to the
PUSH mode which ties the push button to a GPIO pin of the C2000 for use as an interface to the
firmware application.
4. Hall Sensor Power Supply Select (J8)
Use the J8 jumper to select the power supply option for the Hall sensor header. By default, this is
set for 3.3 V, with the other option being 5 V. The Hall sensor header is provided to develop a
sensored BLDC application. The InstaSPIN-FOC™ application provided in MotorWare is a
sensorless BLDC application, which does not require Hall sensor feedback.
5. WAKE Source Select (J4)
Use the J4 jumper to select the input to the WAKE pin of the DRV8305-Q1. The WAKE pin is used
to bring the device out of its low-power sleep mode. The jumper is selected, by default, to drive the
WAKE pin from the main power supply (PVDD). The other option is to drive the WAKE pin from a
C2000 GPIO (MCU).
6. Main Interface Header (H10)
Use the H10 header to monitor all of the control and feedback signals of the power stage. This
includes all of the logic inputs and outputs of the DRV8305-Q1; the SPI bus, the motor voltage, and
current feedback voltages. The 0-Ωresistor banks allow the user to completely disconnect the
C2000 MCU and supply their own control inputs.
7. Power Stage Test Points
All signals in the power stage are brought to loop test points for easy monitoring. These test points
include the MOSFET gate, drain, source pins, the motor outputs, and the current sense resistors.
2 Demo Application
The DRV8305-Q1EVM provides a motor control example through the MotorWare software repository
utilizing InstaSPIN-FOC on the TMS320F28027F Piccolo Microcontroller. InstaSPIN-FOC provides a
sensorless, field-oriented motor control solution compatible across a wide range of motors. This section
covers setting up the hardware, configuring MotorWare for the DRV8305-Q1EVM, and a quick walk-
though of the InstaSPIN GUI.
2.1 Hardware Setup
Use the following steps to set up the hardware:
Step 1. Ensure the proper configuration of the jumpers. See the previous section for more details.
Step 2. Connect the motor phase wires to the terminal block header H14. Order does not matter. If
the motor is spinning in the wrong direction, two of the motor phases can be swapped to
reverse the direction.
Step 3. Connect the power supply to the terminal block header H12. Ensure the proper polarity,
positive to VBAT, negative to GND. Do not enable the power supply at this time.
Step 4. Connect the micro-USB cable to USB connector H9. A cable is suppled with the DRV8305-
Q1EVM and any standard micro-USB cable should also work. Do not connect to the PC at
this time.
Step 5. Enable the power supply. The VBAT power supply LED D4 and 3.3-V power supply, LED D5
should light up.
Step 6. Connect the micro-USB cable to the PC in order to run the GUI and interface to the
DRV8305-Q1EVM.
I TEXAS INSTRUMENTS - Power Supply mtpzl/ww com/tooI/ccstudio. MotorWareW Saflware (Acnvi) Morunwm mm“ m mm a mmwm pm a nmmu‘ mm; a sum. a: ”mum, OrderNow WW WNW.) MM W W. mm WWW.” MN m saw; Desmpnnn h1tQ://www.ti.com/tooI/ccstudio. h1tQ://www.ti.com/too|/d N83057g1 evm.
www.ti.com
Demo Application
5
SLVUAQ4A–April 2016–Revised April 2016
Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated
DRV8305-Q1 Evaluation Module
Figure 4. Board Jumpers and Test Points
2.2 MotorWare (InstaSPIN-FOC) Setup
This section shows how to add DRV8305-Q1EVM support to the MotorWare repository allowing the
InstaSPIN-FOC motor control solution to be run with the DRV8305-Q1EVM.
1. Download the latest MotorWare software repository available in the software folder
http://www.ti.com/tool/ccstudio.
Figure 5. MotorWare Software Home Page
2. Download the latest Code Composer Studio™ version available in the software folder
http://www.ti.com/tool/ccstudio.
3. Download the DRV8305-Q1EVM software files zip folder available from the tool folder
http://www.ti.com/tool/drv8305-q1evm.
l TEXAS INSTRUMENTS » csn‘su: » New.“ > New.“ mmn » He‘p Indudunhbvaryv vanwmhv Bum Ncwfohis Mme La'enclflzd 1/52 :1: a WWW m ms ‘ :9 w H212 i dun: 1121an ‘SM Hm: a 2mm: 1mm Aw HEN am adszmslzgw was a anrWareem w 2 7m x u w 4mm MAKR g mmm.,.,;,u1,uugs w w 2 7mm u w w; mm XRKR # mm m 215 1015 ; :9 p .4 W q E 1227 W g mm m 215 2013 ; :g M ,«pa‘ m m ya ammo » m . mmarwave . mmmmamoammms um" . 46" F MD mummy . 5mm . m New/away Mm: ’ Dilqum/td up: 3“: a m Ids/201525: m 1mm \ r CSDmk c‘ v a , mommy: r mufowavtlfll uh 16 , m r mndu‘e: , hai r bnavd; — Help my v Shimwnh v Bum Nmioldev Narri ’ Datemcmfied ape j bousbddn/EJOIJEVB ' 1c DH aw: :‘Er j housmdNflMSJn/A , :m‘ x ; magnum“: , 1: an «an :‘zv J dMEIZkILm/D W DH >1?!er j mmmlpx , v mm a: r u r mmmwm > momvwav=_zddmons_dmzus~q1wm > 5w r mudma > ml r board: > 4;\y valyv Shalewmhv Bum Nev/lower Nam: fatin‘cdméj r.;< ;="" dn/sedsvqjevan/a="" 315="" 1="" 16254="" :w="" he‘c‘jer="">
Demo Application
www.ti.com
6SLVUAQ4A–April 2016–Revised April 2016
Submit Documentation Feedback
Copyright © 2016, Texas Instruments Incorporated
DRV8305-Q1 Evaluation Module
4. Inside of the zip folder are the additional files (motorware_additions_drv8305-q1evm) needed to add
DRV8305-Q1EVM support to MotorWare. The additional files mirror the folder structure of MotorWare
they are easily placed in the correct directory.
Figure 6. DRV8305-Q1EVM MotorWare Additions
5. Add the hal board files for the DRV8305-Q1EVM to the MotorWare installation. These are located at
motorware_additions_drv8305-q1evm\sw\modules\hal\boards\. Copy the drv8305-q1evm_revA
folder into the corresponding folder in the MotorWare repository.
Figure 7. DRV8305-Q1EVM Hal Board Files
l TEXAS INSTRUMENTS 05mm > m » mummy: » motorwavzlmmlfi » 3w » madn‘a » ha‘ » mm » v. asp Shivéwnh v Bum mm” hbnry . Nani a unamwuwimma J mmmwanym a drvflialk‘ervD a amnsrqurm a mum,“ a kaxuwlpl New fmdev Ja'e mm: x 25 :m , 29 w 315 ’1016 , 29 v A 2 152010 , 29 w 315 ’1016 x 32 v «1 1 152016 , 29 n A v A x 12 mm , Mp2 m szvcma mmm mmm mmm medu Hzficma , n , WW , mmmmmwmsrq]m , m , mm , mw , mm; , .\«, 4a» mm My . 5mm . am Newfa‘du Mm: ’ Data mmhfizd T222 Sue a means ‘11:".wa 3/221”st mam ammo . m . mm m . mmrwmlmmls » ,w . mm , mm in 2 mm; . v ., , M m Wmhmv mm" 7 am ”mm Hm: ’ [mum/n. Tr»: 52: a Dnnmmmmvzvfi 7“ 'mm‘nw :u; M es 5 mummy“ m WWW m m a WWW 7am ‘ m H H l awanww d nvmumpl '7mfi ‘ m w 7an ‘ x :v :u; n H ‘ , mummy: ' MW": .aammmm am ' 2w , 5mm ' mam)“ ' ma; ' Tm Han 30m lududtmhmavyv 5mm” M, «£31; Janus/A a NEW Mae: 7‘"; mm 2, mm 2 a) w 4" w. mm 2w
www.ti.com
Demo Application
7
SLVUAQ4A–April 2016–Revised April 2016
Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated
DRV8305-Q1 Evaluation Module
Figure 8. Copied DRV8305-Q1EVM Hal Board Files
6. Add the solutions board files for the DRV8305-Q1EVM to the MotorWare installation. These are
located at motorware_additions_drv8305-q1evm\sw\solutions\instaspin_foc\boards\. Copy the
drv8305-q1evm_revA folder into the corresponding folder in the MotorWare repository.
Figure 9. DRV8305-Q1EVM Solutions Board Files
l TEXAS INSTRUMENTS -“ usum: » H “mm » mummy mm mm » m, » mmum: » mm n » 2mm: » N m w» :1 am :mmmmw . 5mm . sum Na/«Mda 1 WP ’ WNW» 7W x 7 a EnomMNEDLvn’E ,asx, AL w rm m (a a mmmnsmn , Wm H ‘ ‘a :M M Mr ; a mgmmc m m d mains nmum rm Mm a mam,“ Wm n ‘ m :M m m s a mum» , 1: , A» M N am u r mum": r mum“: .ummmsrmm . w. r ”Mm . WWW.“ r mm) . . 5,“ f w; Hdp 3cm mamnmw v mm . Bum mwm 4 u." g ’ mmm rm w anamwumrmn g mum :1 m w: a“
Demo Application
www.ti.com
8SLVUAQ4A–April 2016–Revised April 2016
Submit Documentation Feedback
Copyright © 2016, Texas Instruments Incorporated
DRV8305-Q1 Evaluation Module
Figure 10. Copied DRV8305-Q1EVM Solutions Board Files
7. Verify the addition of the drv8305-q1evm_revA to MotorWare by compiling and loading one of the lab
projects in the Code Composer Studio development tool. Import the new CCS projects. Projects are
found at motorware\motorware_x_xx_xx_xx\sw\solutions\instaspin_foc\boards\drv8305-
q1evm_revA\f28x\f2802xF\projects. Ensure that Copy projects into workspace is not selected
(MotorWare has relative pathing) and copy all lab projects you wish to evaluate. You can find more
information about the individual labs and working in Code Composer Studio at
motorware\motorware_x_xx_xx_xx\docs\labs.
l TEXAS INSTRUMENTS :, 1mm ccsmpsemms r mm ccs ijeds to Impofl Sam 3 dwenoryto seavzh m exmmg ((5 Edwpse Wm mememmaumory cmmmmvexmocorwayeggxaagmm; REE Sdenzvzmveme Bum :2 stzoveved Mans 39 pmjjabfll [c \mmmmmamargmjaga swxmm ED pmjjabfllb [C‘xthmatamari WWW: ,u1,uugs\:w\snm gm pwamlz [L m mammarmmwm ,myugmswxmmu gm pmjjabflia [c m matamaré‘mmtarmavé ,mjugs 5mm 30 mum» [c«momWWW“ ,myugs Wm 3D pmjjabfl‘ [c (xxmamMiré‘xmatrrwavirlrfllrflfljfi\sw‘xsahm: ZID pvonabflia rt m matamaré‘xmmarwari m 0016\sw\:nmm 3D pmjjabflib [C\thmatamavemamrwaré LmJquWSnM gm pmjjabm [c \mmmmmamargmjaga swxmm ED pmjjab09 [c mmatmwzré‘xmatrrwavi) minus sw‘xsa‘utx: ED pmjjablfla [c m matamaré‘xmmarwari ,mJUJmswxznmu 3m pvojjahn u u\nmmrwzré‘xmaurwavégUJJUJD sw‘xsa‘uu: ED pmjjablla [cm matamaré‘xmmarwavé ,mJUJmmxznmu ED mama [cmmmm motorwimrlrfllrflflrls‘wwgame Selen AH Duclanll 1“ Ram 4 m , DAutomanaHy mm vdevmzed Wemmm m gameseaymdmmy D Copy mm; mtowovksplze 02mm Rnamtt Mum and Maw): nvnr‘ubk damn}: m m mum < am="" rm=""> Fmrsh E httgflwww com/tooI/instasginuniversalgu'
www.ti.com
Demo Application
9
SLVUAQ4A–April 2016–Revised April 2016
Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated
DRV8305-Q1 Evaluation Module
Figure 11. CCS Import
8. To verify the directory setup, compile and load proj_lab01. This is a simple hello world project. Ensure
the DRV8305-Q1EVM has power applied. Assuming a successful compile and load to the DRV8305-
Q1EVM, the STATUS LED D8 will begin to flash.
9. This completes the MotorWare setup, for further information on MotorWare, InstaSPIN-FOC, and the
various labs please refer to the documentation inside of the MotorWare repository.
2.3 InstaSPIN Universal GUI
In addition to interfacing to the InstaSPIN-FOC variables directly through Code Composer Studio, a GUI is
provided that can instrument the variables visually. The InstaSPIN Universal GUI instruments the existing
variables in any MotorWare InstaSPIN-FOC project, meaning you can recompile the .out to add your own
settings and other system code. The InstaSPIN Universal GUI also loads the firmware binary (.out) directly
to the DRV8305-Q1EVM before launching the application.
This section outlines setting up the GUI (these instructions are also inside the GUI Read Me tab, once
launched).
1. Download the latest InstaSPIN Universal GUI available in the software folder
http://www.ti.com/tool/instaspinuniversalgui.
2. Since the GUI requires the firmware binary (.file) file, first compile the appropriate lab project in Code
Composer Studio. The typical first lab is Lab02b. Lab02b focuses on identifying the parameters of the
BLDC motor and then running a basic speed loop to control the motor.
I TEXAS INSTRUMENTS [a ijm Explmr 53 9-6 4 2% prothozb [Active , Flash] 4 ’ Binaries , EV Includes » 3 Flash [g adz.( (a device: mo » u » gummpm,<5 l="" w="" as="" lac/2011260="" w="" m="" 5w:="" 3="" 1="" (n="" .mpm="" mmnw="" .mel="" w="" 1m»="" ‘="" um="" ms/zammm="" m="" g;="" wm="" 7'21'201511m/m="" n=""><3 u="" .ppxmwm="" m="" nun/1m="" w="" ~="" w="" 1="" or="" .mth="" m="" magnum="" :hmmelm="" m="" :nmsmwwgmm="" 10'3'2a122cow="" wm"="" an="" (a="" 21="" mm="" umm="" w="" m="" ”7m="" 7m="" m="" mm="" mm="" (m="" m="" \u="" mam.“="" ans/muss="" m="" [mm="" 393m="" ummm="" smnmmm="" rmnwm.="">
Demo Application
www.ti.com
10 SLVUAQ4A–April 2016–Revised April 2016
Submit Documentation Feedback
Copyright © 2016, Texas Instruments Incorporated
DRV8305-Q1 Evaluation Module
3. In Code Composer Studio, compile the lab project you wish to work with. After a successful compile,
the binary (.out) file is found in the Binaries drop-down menu.
Figure 12. Binary (.out) File Location
4. Copy this file into the InstaSPIN Universal GUI folder for the F2802x_F device. The path is typically
INSTALLDIRECTORY\guicomposer\webapps\InstaSPIN_F2802xF_UNIVERSAL\.
Figure 13. Place Binary (.out) File With GUI
5. Rename the binary (.out) file to appProgram.out. The GUI searches for this filename.
Figure 14. Rename Binary (.out) File
l TEXAS INSTRUMENTS Davln: (unneninns: 1M Mum mum w Mu, m... v mm 1W. mm; pmgum Mm mummy“ ( m\guwompa)an:2k\<><><\,mdudnu\ www="" n="" mm="" quvrmvwecm‘g="" ({xm‘="" (ammgmga="" vwmummumm="" use="" dew="" vmrm="" mam="" fmgvam="" (="" \ngumcmpo):l&zk\v/&apv”rut:spinmzxfjniveks‘ulwngram="" m="" mm;="" reamme="" pm";="" ngnm="" instaspin-foc="" motorwa="" mmm="" [j="" mm:="" [1="" .m="" menu:="" m="" e]="" ra-mug‘:="" d="" pm="" 9="" mam-ma="" instaspin-foc="" mot="" mmmm="" d="" ksiecz‘:="" :thr-nn="" mam:="" 0="" www="" smfijm="" an)“="" m:="">
www.ti.com
Demo Application
11
SLVUAQ4A–April 2016–Revised April 2016
Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated
DRV8305-Q1 Evaluation Module
6. Launch the GUI through the InstaSPIN_UNIVERSAL.exe file. The GUI first programs the DRV8305-
Q1EVM and then loads the application. Ensure that the debugger connection in Code Composer
Studio is closed so that the interface is free for the GUI. If you encounter an issue when loading the
GUI, power down the EVM and remove the USB cable. Reconnect and try again.
Figure 15. Launch GUI
7. To begin the motor identification process in Lab2b, select Enable System and then Run. The motor
begins to walk through a series of steps to identify the different parameters.
Figure 16. Enable Motor Identification
8. After a successful identification, select Run again and the motor begins to run with a basic speed loop
to the speed and acceleration that are specified.
Figure 17. Enable Motor
l TEXAS INSTRUMENTS 2m ve m: m Warm“: Shams News? max Shams News? ma: Shams News? m: Shams News? mm mm lapse» mas mm lapse» mas mm lapse» ac, mm lapse» mas mm lapse» no cam 2615‘s anE cam imz‘slsv JxflC m» (my 2 a may. ()ch ymmsmwm “333’?" « \ m" V WET: mm”; mu‘ ”WWW T“ i“? ? ”SEE: W515“ mfj‘c‘v’ffz Gamiilii’ C ‘ \ g M: me on: ma um (and \ns,L=m,,vus,/ _ MANflAL wmrE mnun new awash“ «m wlurE READ
Demo Application
www.ti.com
12 SLVUAQ4A–April 2016–Revised April 2016
Submit Documentation Feedback
Copyright © 2016, Texas Instruments Incorporated
DRV8305-Q1 Evaluation Module
9. Any time after Enable System is selected, you can interface to the DRV8305 SPI registers through the
InstaSPIN Universal GUI. The registers do not automatically update and must be read or written to in
order to update the DRV8305 and register page.
Figure 18. DRV8305 SPI Registers
fl; TEXAS INSTRUMENTS m1 ://www.ti.com/tooI/drv83057 1evm EMULATOR - XDS100V2
EMULATOR - XDS100v2
2.2µF
C2
1µF
C3
EMU_5V
EMU_GND EMU_GND
EMU_3.3V
EMU_GND
DM
DP
USB EEPROM
FT2232H - USB TO JTAG/UART
5V TO 3.3V
EMU_GND
GND
EMU_TDO
EMU_GND
3.3V_LDO
SH-J1
SH-J3
EMULATION TO C2000
EMU_3.3V
SH-J2
EMU_5V 5V
0 R8
0R9
0R10
0R11
0R12
0R13
0R14
EMU_TX
EMU_RX
EMU_TCK
EMU_TDI
EMU_TMS
EMU_TRST
TCK
TX
RX
TDO
TRST
TDI
TMS
1
2
3
4
5
6
7
10
11
8
9
H9 TP1
TP3
TP2
0.5A 15V
F1
1
OUT 2
IN
3
OUT 4
GND
U2
TLV1117LV33DCYR
EMU_GND
VSS 2
DI
3
VCC
6
CS
5
CLK
4
DO 1
U1
EMU_GND
EMU_3.3V
0.1µF
C1
EMU_GND
EECS
EECLK
EEDATA
2.2k
R2 EEDATA
10k
R1
EMU_3.3V
ACBUS0 26
ACBUS1 27
ACBUS2 28
ACBUS3 29
ACBUS4 30
ACBUS5 32
ACBUS6 33
ACBUS7 34
ADBUS0 16
ADBUS1 17
ADBUS2 18
ADBUS3 19
ADBUS4 21
ADBUS5 22
ADBUS6 23
ADBUS7 24
AGND 10
BCBUS0 48
BCBUS1 52
BCBUS2 53
BCBUS3 54
BCBUS4 55
BCBUS5 57
BCBUS6 58
BCBUS7 59
BDBUS0 38
BDBUS1 39
BDBUS2 40
BDBUS3 41
BDBUS4 43
BDBUS5 44
BDBUS6 45
BDBUS7 46
DM
7
DP
8
EECLK
62
EECS
63
EEDATA
61
GND 1
GND 5
GND 11
GND 15
GND 25
GND 35
GND 47
GND 51
OSCI
2
OSCO
3
PWREN 60
RESET
14
REF
6SUSPEND 36
TEST
13
VCCIO
20
VCCIO
31
VCCIO
42
VCCIO
56
VCORE
12
VCORE
37
VCORE
64
VPHY
4
VPLL
9
VREGIN
50
VREGOUT
49
U3
0.1µF
C14
EMU_3.3V
EMU_GND
0.1µF
C15
0.1µF
C10
0.1µF
C4
0.1µF
C13
0.1µF
C12
0.1µF
C6
1.8V
EMU_GND
4.7µF
C9
4.7µF
C11
EMU_3.3V
3.3µF
C8
1.8V
L1
L2
EMU_3.3V
DM
DP
EECS
VPLL
VPHY
EECLK
EEDATA
RESET#
1.0k
R6
EMU_3.3V
REF
12.0k
R7
EMU_GND
20pF
C7
20pF
C5
12MHz
12
Y1
OSCI
OSCO
EMU_GND EMU_GND EMU_GND
EMU_TCK
EMU_TDI
EMU_TDO
EMU_TMS
EMU_TRST
1.0k
R15
EMU_GND
EMU_RX
EMU_TX
EMU_3.3V
GreenD2
GreenD1
Green
D3
EMU_3.3V
330
R5
EMU_GND
330
R4
330
R3
3.3V
Default LDO
1
2
3
J3
J1
J2
EMU_GND
Copyright © 2016, Texas Instruments Incorporated
www.ti.com
DRV8305-Q1EVM
13
SLVUAQ4A–April 2016–Revised April 2016
Submit Documentation Feedback
Copyright © 2016, Texas Instruments Incorporated
DRV8305-Q1 Evaluation Module
3 DRV8305-Q1EVM
All of the hardware source files are found at the DRV8305-Q1EVM tool folder http://www.ti.com/tool/drv8305-q1evm in the download file for the
DRV8305-Q1EVM Hardware Files.
3.1 DRV8305-Q1EVM Schematics
Figure 19 through Figure 22 show the EVM schematics.
Figure 19. DRV8305-Q1EVM Emulator Schematic
{if Tans INSTRUMENTS
DRV8305-Q1TMS320F28027F-Q1
1
2
3
4
S1
GND
3.3V
0.1µF
C37
GND
MCU_RESET OR PUSH BUTTON
47k
R47
330
R51
VREG/VREF
FAULT_LED
330
R53
LED
Green
D8
GND
LED
GENERAL PURPOSE
nFAULT
MCU TO DRV
GND
330
R50
3.3V
3.3V_LED
GND
TESTPOINTS
PVDD_LED
GND
PVDD
Green
D4
4.99k
R49
JTAG HEADER
TCK
TDO
TMS
TDI
TRST
GND
3.3V
MCU_EN_GATE
MCU_INH_A
MCU_INH_B
MCU_INL_B
MCU_INH_C
MCU_INL_C
MCU_nFAULT
MCU_nSCS
MCU_SDI
MCU_SDO
MCU_SCLK
MCU_RESET
MCU_ISEN_C
MCU_V_PVDD
MCU_VSEN_B
MCU_ISEN_B
MCU_ISEN_A
MCU_VSEN_C
MCU_VSEN_A
3.3V
MCU_WAKE
GND
MCU_INL_A
VDRAIN Should Have Low Impedance
Path To Drain Of The High-Side FETs
POT
3.3V
GND
POTENTIOMETER
330
330
R52
Red
D7
VREG/VREF
PWRGD_LED
PWRGD
SH-J6
MCU_RESET PUSH
Default Reset
TP9 TP10
0R16
0R17
0R19
0R20
0R22
0R24
0R25
0R26
0R27
0R28
0R29
0R30
0R31
0R33
0R34
0R35
0R36
0R37
0R38
0R40
0R42
0R46
SDO
SCLK
SDI
EN_GATE
INH_A
INL_A
INH_B
INL_B
INH_C
INL_C
nFAULT
nSCS
PWRGD
ISEN_AX
ISEN_BX
ISEN_CX
VSEN_PVDD
VSEN_B
VSEN_C
VSEN_A
VREG/VREF
WAKE_X
Red
D6
Green
D5
1 2
3 4
5 6
7 8
9 10
11 12
13 14
H11
TP11
1
2
3
J6
ADCINA0/VREFHI
10
ADCINA1
8
ADCINA2/COMP1A/AIO2
9
ADCINA3
7
ADCINA4/COMP2A/AIO4
5
ADCINA6/AIO6
4
ADCINA7
6
ADCINB1
13
ADCINB2/COMP1B/AIO10
14
ADCINB3
15
ADCINB4/COMP2B/AIO12
16
ADCINB6/AIO14
17
ADCINB7
18
GPIO0/EPWM1A 29
GPIO1/EPWM1B/COMP1OUT 28
GPIO12/TZ1/SCITXDA 47
GPIO16/SPISIMOA/TZ2 27
GPIO17/SPISOMIA/TZ3 26
GPIO18/SPICLKA/SCITXDA/XCLKOUT 24
GPIO19/XCLKIN/SPISTEA/SCIRXDA/ECAP1 25
GPIO2/EPWM2A 37
GPIO28/SCIRXDA/SDAA/TZ2 48
GPIO29/SCITXDA/SCLA/TZ3 1
GPIO3/EPWM2B/COMP2OUT 38
GPIO32/SDAA/EPWMSYNCI/ADCSOCAO 31
GPIO33/SCLA/EPWMSYNCO/ADCSOCBO 36
GPIO34/COMP2OUT 19
GPIO35/TDI 20
GPIO36/TMS 21
GPIO37/TDO 22
GPIO38/XCLKIN/TCK 23
GPIO4/EPWM3A 39
GPIO5/EPWM3B/ECAP1 40
GPIO6/EPWM4A/EPWMSYNCI/EPWMSYNCO 41
GPIO7/EPWM4B/SCIRXDA 42
TEST
30
VDD
32
VDD
43
VDDA
11
VDDIO
35
VSS 33
VSS 44
VSSA/VREFLO 12
VREGENZ
34
X1
45
X2
46
TRST
2
XRS
3
U4
TMS320F28027FPTQ
VDDA
VDDIO
L5
2.2µF
C31
3.3V
GND
L4
3.3V
2.2µF
C21
GND
2.2µF
C29
GND
2.2µF
C20
GND
VDD1VDD2
MCU_RESET
nTRST
GND 3.3V
MCU_VSEN_A
MCU_ISEN_A
MCU_VSEN_C
MCU_HALL_A
MCU_HALL_C
MCU_ISEN_C
MCU_VSEN_B
MCU_ISEN_B
MCU_V_PVDD
MCU_HALL_B
PUSH
POT
MCU_INH_A
MCU_INL_A
MCU_INH_B
MCU_INL_B
PWM_OUT
PWM_IN
MCU_INH_C
MCU_INL_C
MCU_nFAULT
MCU_SDI
MCU_SDO
MCU_SCLK
MCU_nSCS
RX
TX
MCU_EN_GATE
MCU_WAKE
LED
TDI
TMS
TDO
TCK
GND
Default Debug
2.2k
R44
TRST
GND
JTAG RESET MODE
Debug
Functional
SH-J5
1
2
3
J5
nTRST
EXTERNAL CONTROL
J7
MCU INTERFACE
EN_GATE
1
INH_A
2
INL_A
3
INH_B
4
INL_B
5
INH_C
6
INL_C
7
FAULT
8
SCS
9
SDI
10
SDO
11
SCLK
12
PWRGD 13
GND 14
AVDD
15
GLC 25
SLC 26
SHC 27
GHC 28
GHB 29
SHB 30
SLB 31
GLB 32
GLA 33
SLA 34
SHA 35
GHA 36
VCP_LSD
37
VCPH
38
CP2H 39
CP2L 40
PVDD
41
CP1L 42
CP1H 43
VDRAIN 44
GND 45
DVDD
46
WAKE 47
VREG/VREF 48
PAD 49
SO1
16
SO2
17
SO3
18 SN3 19
SN2 21
SN1 23
SP3 20
SP2 22
SP1 24
U5
DRV8305NEPHPRQ1
SH-J4
PVDD
WAKE_X
WAKE
WAKE SOURCE SELECT
Default PVDD
47k
R21
1
2
3
J4
56 R39
56 R41
56 R45
2200pF
C34
2200pF
C33
2200pF
C32
GND
LP FILTER
ISEN_AX
ISEN_BX
ISEN_CX DVDD
VDRAIN
VCP_LSD
AVDD
TP4
TP5
TP6
TP7
TP8
PVDD_X
INH_A
INL_A
INH_B
INL_B
INH_C
INL_C
ISEN_A
ISEN_B
ISEN_C
EN_GATE
nSCS
SDO
SDI
SCLK
nFAULT
VREG/VREF
0.1µF
C30
GND
10k
R32
1µF C24 0 R23
1µF C35
GND
4.7µF C22 PVDD_X
DVDD
AVDD
L3
1000pF
C18
0.1µF
C19
1000pF
C16
0.1µF
C17
GND
PVDD
OPTIONAL PI FILTER
PVDD_X
1µF
C23
GND
2.2µF
C27
PVDD_X
GH_A
SH_A
GL_A
SL_A
GL_B
SL_B
SH_B
GH_B
GH_C
SH_C
SL_C
GL_C
SA_P
SA_N
SB_P
SB_N
SC/SUM_P
SC/SUM_N
GND
CP2L
0.047µFC25
0.047µFC26
CP1L
1µF
C28
VREG/VREF
GND
100R18
PVDD
VREG/VREF
0.1µF
C36
GND
10k
R43
CP2H
CP1H
PWM_OUT
PWM_IN
VDRAIN
PWRGD
WAKE
VCP_LSD
VCPH
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
H10
50k
R48
Copyright © 2016, Texas Instruments Incorporated
DRV8305-Q1EVM
www.ti.com
14 SLVUAQ4A–April 2016–Revised April 2016
Submit Documentation Feedback
Copyright © 2016, Texas Instruments Incorporated
DRV8305-Q1 Evaluation Module
Figure 20. DRV8305-Q1EVM MCU DRV Schematic
CON NECTORS/DRIVE-STAGE {L} TEXAS INSTRUMENTS _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ u _ L n u _ _ _ _ u u m i n _ _ _ w i 7 _ u u n 7 _ _ i _ _ _ sli‘ _ L lfi " u u T_ g m _ _ _ E _ _ _ _ _ elf _ 7, m u " L.|_ :7 n _ u u u _ _ sli‘ " u n ij :7 u m a u 7, u u _ _ _ _ _ _ _ _ u u n _ _ _
MAIN SUPPLY
MOTOR & BEMF SENSE
4.99k
R65
4.99k
R66
4.99k
R67
GNDGND GND
MOT_A
MOT_B
MOT_C
VSEN_A VSEN_B VSEN_C
VBAT
GND
LC FILTER
CONNECTORS/DRIVE-STAGE
1µF
C42
0.01µF
C44
GND
1uHL6
D11 D12 D13
VREG/VREF VREG/VREF VREG/VREF
0.1µF
C52
0.1µF
C53
0.1µF
C54
4.99k
R58
1µF
C50
0.01µF
C48
0.1µF
C49
PVDD
GND
GND
VSEN_PVDD
D10
VREG/VREF
0.1µF
C51
3.3V SUPPLY
0.1µF
C43
1000pF
C46
1000pF
C47
DIGITAL HALL INTERFACE
HALL_PWR
HALL_PWR
GND
SH-J7
5V 3.3VHALL_PWR
Default 3.3V
1.0k
R59
1.0k
R60
1.0k
R61
1000pF
C55
1000pF
C56
1000pF
C57
HALL_B
GND
HALL_A
HALL_C
Q1
D9
CD0603-S0180
GND
-12V REVERSE POLARITY PROTECTION
VCPH
10k
R54
10k
R55
TP14
TP13
TP12
4.4 - 45V
62.0k
R62
62.0k
R63
62.0k
R64
62.0k
R57
10k
R84
MCU_HALL_A
10k
R83
MCU_HALL_C
MCU_HALL_B
10k
R82
3.3V
Q2
H12
1
2
3
H14
VIN
1
GND 2
VOUT 3
GND 4
U6
TPS7B6933QDCYRQ1
10µF
C39
0.1µF
C38
0
R56
PVDD
GND
0.1µF
C41
10µF
C40
GND
3.3V_LDO
GND
5
4
1
2
3
H13
470µF
C45
1
2
3
J8
GND 4
2Y 5
3A
6
1Y 7
VCC
8
1A
1
3Y 2
2A
3
U7
SN74LVC3G07QDCURQ1
HALL_A
HALL_B
HALL_C
MCU_HALL_A
MCU_HALL_B
MCU_HALL_C
GND
3.3V
Copyright © 2016, Texas Instruments Incorporated
www.ti.com
DRV8305-Q1EVM
15
SLVUAQ4A–April 2016–Revised April 2016
Submit Documentation Feedback
Copyright © 2016, Texas Instruments Incorporated
DRV8305-Q1 Evaluation Module
Figure 21. DRV8305-Q1EVM Power Schematic
*9 TEXAS INSTRUMENTS fl L 4? H—‘Uri Q: fl L 4?
PVDD
GH_A
GL_A
0
R68
0
R71
SH_A NT1
Net-Tie
1µF
C61
0.01µF
C62
GND
NT4
Net-Tie
SL_A
NT7
Net-Tie
NT10
Net-Tie
DRIVE STAGE & CURRENT SENSE
MOT_A
A
PVDD
GH_B
GL_B
0
R69
0
R72
SH_B NT2
Net-Tie
1µF
C63
0.01µF
C64
GND
NT5
Net-Tie
SL_B
NT8
Net-Tie
NT11
Net-Tie
SB_N
SB_P
MOT_B
B
PVDD
GH_C
GL_C
0
R70
0
R73
SH_C NT3
Net-Tie
1µF
C65
0.01µF
C66
GND
NT6
Net-Tie
SL_C
NT9
Net-Tie
NT12
Net-Tie
MOT_C
C
1800pF
C70
DNP
1800pF
C67
DNP
1800pF
C71
DNP
1800pF
C68
DNP
1800pF
C72
DNP
1800pF
C69
DNP
SA_N
SA_P
SC_N
SC_P
GND
1000pF
C73
1000pF
C74
Current Shunt Options
0 R78
0R79
0 R80
0R81
SC_N
SC_P
SSUM_N
SC/SUM_N
SC/SUM_P
SSUM_P
NT13
Net-Tie
NT14
Net-Tie
SSUM_N
SSUM_P
TP15
TP31 TP32
TP33
TP30
TP27
TP21
TP24
TP18 TP19
TP25
TP28
TP22
TP20
TP26
TP29
TP23
TP16 TP17
GND_X
1000pF
C75
Q3 Q4 Q5
Q6 Q7 Q8
470µF
C58
470µF
C59
470µF
C60
0.005
R74
0.005
R75
0.005
R76
0
R77
Copyright © 2016, Texas Instruments Incorporated
DRV8305-Q1EVM
www.ti.com
16 SLVUAQ4A–April 2016–Revised April 2016
Submit Documentation Feedback
Copyright © 2016, Texas Instruments Incorporated
DRV8305-Q1 Evaluation Module
Figure 22. DRV8305-Q1EVM Bridges Schematic
l TEXAS INSTRUMENTS
www.ti.com
DRV8305-Q1EVM
17
SLVUAQ4A–April 2016–Revised April 2016
Submit Documentation Feedback
Copyright © 2016, Texas Instruments Incorporated
DRV8305-Q1 Evaluation Module
3.2 DRV8305-Q1EVM Bill of Materials
Figure 22 lists the EVM bill of materials.
Table 1. DRV8305-Q1EVM Bill of Materials
Designator Qty Value Description Package Reference Part Number Manufacturer Alternate Part
Number Alternate
Manufacturer
!PCB1 1 Printed Circuit Board MDBU014 Any
C1, C4, C6, C10, C12, C13,
C14, C15, C30, C36, C37 11 0.1uF CAP, CERM, 0.1 µF, 10 V, ±10%, X7R, 0603 0603 C0603C104K8RACTU Kemet
C2, C20, C21, C29, C31 5 2.2uF CAP, CERM, 2.2 µF, 10 V, ±10%, X7R, 0603 0603 GRM188R71A225KE15D Murata
C3, C23, C24, C28, C35 5 1uF CAP, CERM, 1 µF, 16 V, ±10%, X7R, 0603 0603 C1608X7R1C105K TDK
C5, C7 2 20pF CAP, CERM, 20 pF, 50 V, ±5%, C0G/NP0, 0603 0603 GRM1885C1H200JA01D Murata
C8 1 3.3uF CAP, CERM, 3.3 µF, 10 V, ±10%, X7R, 0805 0805 GRM21BR71A335KA99L Murata
C9, C11 2 4.7uF CAP, CERM, 4.7 µF, 10 V, ±10%, X7R, 0805 0805 GRM21BR71A475KA73L Murata
C16, C18, C46, C47 4 1000pF CAP, CERM, 1000 pF, 50 V, ±10%, X7R, 0603 0603 C1608X7R1H102K TDK
C17, C19, C38, C41, C43,
C49 6 0.1uF CAP, CERM, 0.1 µF, 50 V, ±10%, X7R, 0603 0603 C1608X7R1H104K TDK
C22 1 4.7uF CAP, CERM, 4.7 µF, 50 V, ±10%, X7R, 1206 1206 GRM31CR71H475KA12L Murata
C25 1 0.047uF CAP, CERM, 0.047 µF, 50 V, ±10%, X7R, 0603 0603 C1608X7R1H473K TDK
C26 1 0.047uF CAP, CERM, 0.047 µF, 100 V, ±10%, X7R, 0603 0603 C0603C473K1RACTU Kemet
C27 1 2.2uF CAP, CERM, 2.2 µF, 100 V, ±10%, X7R, 1210 1210 GRM32ER72A225KA35L Murata
C32, C33, C34 3 2200pF CAP, CERM, 2200 pF, 16 V, ±10%, X7R, 0603 0603 GRM188R71C222KA01D Murata
C39, C40 2 10uF CAP, CERM, 10 µF, 50 V, ±10%, X7R, 1210 1210 GRM32ER71H106KA12L Murata
C42, C50, C61, C63, C65 5 1uF CAP, CERM, 1 µF, 50 V, ±10%, X7R, 0805 0805 GRM21BR71H105KA12L Murata
C44, C48 2 0.01uF CAP, CERM, 0.01 µF, 50 V, ±10%, X7R, 0603 0603 C1608X7R1H103K TDK
C45, C58, C59, C60 4 470uF CAP, AL, 470 µF, 50 V, ±20%, TH 10x20 ECA-1HM471 Panasonic
C51, C52, C53, C54 4 0.1uF CAP, CERM, 0.1 µF, 16 V, ±5%, X7R, 0603 0603 C0603C104J4RACTU Kemet
C55, C56, C57, C73, C74,
C75 6 1000pF CAP, CERM, 1000 pF, 16 V, ±10%, X7R, 0603 0603 GRM188R71C102KA01D Murata
C62, C64, C66 3 0.01uF CAP, CERM, 0.01 µF, 50 V, ±10%, X8R, 0603 0603 C1608X8R1H103K TDK
D1, D2, D3, D4, D5, D8 6 Green LED, Green, SMD LED_0805 LTST-C171GKT Lite-On
D6, D7 2 Red LED, Red, SMD LED_0805 LTST-C170KRKT Lite-On
D9 1 90V Diode, Switching, 90 V, 0.1 A, 0603 Diode 0603 Diode CD0603-S0180 Bourns
D10, D11, D12, D13 4 35V Diode, Schottky, 35 V, 0.1 A, 0603 Diode 0603 Diode CD0603-B0130L Bourns
F1 1 PTC RESET 15V .500A SMD 1206 1206 1206L050/15YR Littelfuse
H1, H2, H5, H6 4 Standoff, Hex, 0.5"L #4-40 Nylon Standoff 1902C Keystone
H3, H4, H7, H8 4 Machine Screw, Round, #4-40 x 1/4, Nylon, Philips panhead Screw NY PMS 440 0025 PH B&F Fastener Supply
H9 1 Connector, micro USB Type B, Receptacle, R/A, SMD Micro USB-B receptacle ZX62-B-5PA(11) Hirose Electric Co. Ltd.
H10 1 Header, 2.54mm, 24x1, Gold, TH Header, 2.54mm, 24x1,
TH PEC24SAAN Sullins Connector
Solutions
H11 1 Header, 100mil, 7x2, Gold, TH 7x2 Header TSW-107-07-G-D Samtec
H12 1 Terminal Block, 30A, 9.52mm (.375) Pitch, 2-Pos, TH 19.62x21.5x12.5mm OSTT7022150 On-Shore Technology
H13 1 Header, 2.54mm, 5x1, Tin, TH Header, 2.54mm, 5x1, TH PEC05SAAN Sullins Connector
Solutions
l TEXAS INSTRUMENTS
DRV8305-Q1EVM
www.ti.com
18 SLVUAQ4A–April 2016–Revised April 2016
Submit Documentation Feedback
Copyright © 2016, Texas Instruments Incorporated
DRV8305-Q1 Evaluation Module
Table 1. DRV8305-Q1EVM Bill of Materials (continued)
Designator Qty Value Description Package Reference Part Number Manufacturer Alternate Part
Number Alternate
Manufacturer
H14 1 Terminal Block, 3x1, 9.52mm, TH Terminal Block, 3x1,
9.52mm, TH OSTT7032150 On-Shore Technology
J1, J2, J7 3 Header, 100mil, 2x1, Tin, TH Header, 2 PIN, 100mil,
Tin PEC02SAAN Sullins Connector
Solutions
J3, J4, J5, J6, J8 5 Header, 100mil, 3x1, Tin, TH Header, 3 PIN, 100mil,
Tin PEC03SAAN Sullins Connector
Solutions
L1, L2, L3, L4, L5 5 330 ohm FERRITE CHIP 330 OHM 1200MA 0603 0603 BLM18PG331SH1D Murata
L6 1 1uH Inductor, Powdered Iron, 1 µH, 29 A, 0.0025 ohm, SMD 13.9x5.9x13.5mm SRP1250-1R0M Bourns
LBL1 1 Thermal Transfer Printable Labels, 0.650" W x 0.200" H - 10,000
per roll PCB Label 0.650"H x
0.200"W THT-14-423-10 Brady
Q1 1 65 V Transistor, NPN, 65 V, 0.1 A, SOT-23 SOT-23 BC846BLT1G ON Semiconductor
Q2, Q3, Q4, Q5, Q6, Q7, Q8 7 60V MOSFET, N-CH, 60 V, 28 A, SON 5x6mm SON 5x6mm CSD18540Q5B Texas Instruments None
R1, R32, R43, R54, R55,
R82, R83, R84 8 10k RES, 10 k, 5%, 0.1 W, 0603 0603 CRCW060310K0JNEA Vishay-Dale
R2, R44 2 2.2k RES, 2.2 k, 5%, 0.1 W, 0603 0603 CRCW06032K20JNEA Vishay-Dale
R3, R4, R5, R50, R51, R52,
R53 7 330 RES, 330, 5%, 0.1 W, 0603 0603 CRCW0603330RJNEA Vishay-Dale
R6, R15, R59, R60, R61 5 1.0k RES, 1.0 k, 5%, 0.1 W, 0603 0603 CRCW06031K00JNEA Vishay-Dale
R7 1 12.0k RES, 12.0 k, 1%, 0.1 W, 0603 0603 RC0603FR-0712KL Yageo America
R8, R9, R10, R11, R12,
R13, R14, R16, R17, R19,
R20, R22, R23, R24, R25,
R26, R27, R28, R29, R30,
R31, R33, R34, R35, R36,
R37, R38, R40, R42, R46,
R56, R68, R69, R70, R71,
R72, R73, R78, R79, R80,
R81
41 0 RES, 0, 5%, 0.1 W, 0603 0603 CRCW06030000Z0EA Vishay-Dale
R18 1 100 RES, 100, 5%, 0.1 W, 0603 0603 CRCW0603100RJNEA Vishay-Dale
R21, R47 2 47k RES, 47 k, 5%, 0.1 W, 0603 0603 CRCW060347K0JNEA Vishay-Dale
R39, R41, R45 3 56 RES, 56, 5%, 0.1 W, 0603 0603 CRCW060356R0JNEA Vishay-Dale
R48 1 50k Trimming Potentiometer, 50K, 0.5W, TH 9.53x8.89mm 3352T-1-503LF Bourns
R49, R58, R65, R66, R67 5 4.99k RES, 4.99 k, 1%, 0.1 W, 0603 0603 CRCW06034K99FKEA Vishay-Dale
R57, R62, R63, R64 4 62.0k RES, 62.0 k, 1%, 0.1 W, 0603 0603 RC0603FR-0762KL Yageo America
R74, R75, R76 3 0.005 RES SMD 0.005 OHM 1% 3W 2512 2512 LRMAP2512-R005FT4 TT Electronics/Welwyn
R77 1 0 RES, 0, 5%, 1.5 W, AEC-Q200 Grade 0, 2512 2512 CRCW25120000Z0EGHP Vishay-Dale
S1 1 Switch, Tactile, SPST-NO, 0.05A, 12V, SMT SW, SPST 6x6 mm 4-1437565-1 TE Connectivity
SH-J1, SH-J2, SH-J3, SH-
J4, SH-J5, SH-J6, SH-J7 7 1x2 Shunt, 100mil, Gold plated, Black Shunt 969102-0000-DA 3M SNT-100-BK-G Samtec
TP1, TP2, TP15, TP16,
TP17 5 Red Test Point, Miniature, Red, TH Red Miniature Testpoint 5000 Keystone
TP3, TP30, TP31, TP32,
TP33 5 Black Test Point, Miniature, Black, TH Black Miniature Testpoint 5001 Keystone
TP9, TP10, TP14 3 Black Test Point, Compact, Black, TH Black Compact Testpoint 5006 Keystone
TP11 1 1mm Uninsulated Shorting Plug, 10.16mm spacing, TH Shorting Plug, 10.16mm
spacing, TH D3082-05 Harwin
l TEXAS INSTRUMENTS
www.ti.com
DRV8305-Q1EVM
19
SLVUAQ4A–April 2016–Revised April 2016
Submit Documentation Feedback
Copyright © 2016, Texas Instruments Incorporated
DRV8305-Q1 Evaluation Module
Table 1. DRV8305-Q1EVM Bill of Materials (continued)
Designator Qty Value Description Package Reference Part Number Manufacturer Alternate Part
Number Alternate
Manufacturer
TP12, TP13 2 Red Test Point, Compact, Red, TH Red Compact Testpoint 5005 Keystone
TP18, TP19, TP20, TP21,
TP22, TP23, TP24, TP25,
TP26, TP27, TP28, TP29
12 White Test Point, Miniature, White, TH White Miniature Testpoint 5002 Keystone
U1 1 2K Microwire Compatible Serial EEPROM, SOT-23-6 SOT-23-6 93LC56BT-I/OT Microchip
U2 1 Single Output LDO, 1 A, Fixed 3.3 V Output, 2 to 5.5 V Input, 4-
pin SOT-223 (DCY), -40 to 125 degC, Green (RoHS & no Sb/Br) DCY0004A TLV1117LV33DCYR Texas Instruments Equivalent Texas Instruments
U3 1 Dual High Speed USB To Multipurpose UART/FIFO IC, LQFP-
64 LQFP_10x10mm FT2232HL-REEL FTDI
U4 1 Piccolo Microcontroller, PT0048A PT0048A TMS320F28027FPTQ Texas Instruments TMS320F28027FPTT Texas Instruments
U5 1 Three Phase Automotive Gate Driver with Three Integrated
Current Shunt Amplifiers and Voltage Regulator, PHP0048G PHP0048G DRV8305NEPHPRQ1 Texas Instruments DRV8305NEPHPQ1 Texas Instruments
U6 1 High Voltage Ultra Low Iq - Low Drop Out Regulator, DCY0004A DCY0004A TPS7B6933QDCYRQ1 Texas Instruments Texas Instruments
U7 1 TRIPLE BUFFER/DRIVER WITH OPEN-DRAIN OUTPUTS,
DCU0008A DCU0008A SN74LVC3G07QDCURQ1 Texas Instruments Texas Instruments
Y1 1 CRYSTAL, 12MHz, 20pF, SMD 7x2.3x4.1mm ECS-120-20-3X-TR ECS Inc.
C67, C68, C69, C70, C71,
C72 0 1800pF CAP, CERM, 1800 pF, 100 V, ±10%, X7R, 0603 0603 GRM188R72A182KA01D Murata
FID1, FID2, FID3 0 Fiducial mark. There is nothing to buy or mount. N/A N/A N/A
Notes: Unless otherwise noted in the Alternate PartNumber and/or Alternate Manufacturer columns, all parts may be substituted with equivalents.
l TEXAS INSTRUMENTS
Revision History
www.ti.com
20 SLVUAQ4A–April 2016–Revised April 2016
Submit Documentation Feedback
Copyright © 2016, Texas Instruments Incorporated
Revision History
Revision History
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
Changes from Original (April) to A Revision ................................................................................................................... Page
• Added the hot surfaces warning......................................................................................................... 2
STANDARD TERMS AND CONDITIONS FOR EVALUATION MODULES
1. Delivery: TI delivers TI evaluation boards, kits, or modules, including any accompanying demonstration software, components, or
documentation (collectively, an “EVM” or “EVMs”) to the User (“User”) in accordance with the terms and conditions set forth herein.
Acceptance of the EVM is expressly subject to the following terms and conditions.
1.1 EVMs are intended solely for product or software developers for use in a research and development setting to facilitate feasibility
evaluation, experimentation, or scientific analysis of TI semiconductors products. EVMs have no direct function and are not
finished products. EVMs shall not be directly or indirectly assembled as a part or subassembly in any finished product. For
clarification, any software or software tools provided with the EVM (“Software”) shall not be subject to the terms and conditions
set forth herein but rather shall be subject to the applicable terms and conditions that accompany such Software
1.2 EVMs are not intended for consumer or household use. EVMs may not be sold, sublicensed, leased, rented, loaned, assigned,
or otherwise distributed for commercial purposes by Users, in whole or in part, or used in any finished product or production
system.
2Limited Warranty and Related Remedies/Disclaimers:
2.1 These terms and conditions do not apply to Software. The warranty, if any, for Software is covered in the applicable Software
License Agreement.
2.2 TI warrants that the TI EVM will conform to TI's published specifications for ninety (90) days after the date TI delivers such EVM
to User. Notwithstanding the foregoing, TI shall not be liable for any defects that are caused by neglect, misuse or mistreatment
by an entity other than TI, including improper installation or testing, or for any EVMs that have been altered or modified in any
way by an entity other than TI. Moreover, TI shall not be liable for any defects that result from User's design, specifications or
instructions for such EVMs. Testing and other quality control techniques are used to the extent TI deems necessary or as
mandated by government requirements. TI does not test all parameters of each EVM.
2.3 If any EVM fails to conform to the warranty set forth above, TI's sole liability shall be at its option to repair or replace such EVM,
or credit User's account for such EVM. TI's liability under this warranty shall be limited to EVMs that are returned during the
warranty period to the address designated by TI and that are determined by TI not to conform to such warranty. If TI elects to
repair or replace such EVM, TI shall have a reasonable time to repair such EVM or provide replacements. Repaired EVMs shall
be warranted for the remainder of the original warranty period. Replaced EVMs shall be warranted for a new full ninety (90) day
warranty period.
3Regulatory Notices:
3.1 United States
3.1.1 Notice applicable to EVMs not FCC-Approved:
This kit is designed to allow product developers to evaluate electronic components, circuitry, or software associated with the kit
to determine whether to incorporate such items in a finished product and software developers to write software applications for
use with the end product. This kit is not a finished product and when assembled may not be resold or otherwise marketed unless
all required FCC equipment authorizations are first obtained. Operation is subject to the condition that this product not cause
harmful interference to licensed radio stations and that this product accept harmful interference. Unless the assembled kit is
designed to operate under part 15, part 18 or part 95 of this chapter, the operator of the kit must operate under the authority of
an FCC license holder or must secure an experimental authorization under part 5 of this chapter.
3.1.2 For EVMs annotated as FCC – FEDERAL COMMUNICATIONS COMMISSION Part 15 Compliant:
CAUTION
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to
operate the equipment.
FCC Interference Statement for Class A EVM devices
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
SPACER
SPACER
SPACER
SPACER
SPACER
SPACER
SPACER
SPACER
FCC Interference Statement for Class B EVM devices
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
3.2 Canada
3.2.1 For EVMs issued with an Industry Canada Certificate of Conformance to RSS-210
Concerning EVMs Including Radio Transmitters:
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may
cause undesired operation of the device.
Concernant les EVMs avec appareils radio:
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation
est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit
accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Concerning EVMs Including Detachable Antennas:
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser)
gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type
and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for
successful communication. This radio transmitter has been approved by Industry Canada to operate with the antenna types
listed in the user guide with the maximum permissible gain and required antenna impedance for each antenna type indicated.
Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited
for use with this device.
Concernant les EVMs avec antennes détachables
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et
d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage
radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope
rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante. Le
présent émetteur radio a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés dans le
manuel d’usage et ayant un gain admissible maximal et l'impédance requise pour chaque type d'antenne. Les types d'antenne
non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de
l'émetteur
3.3 Japan
3.3.1 Notice for EVMs delivered in Japan: Please see http://www.tij.co.jp/lsds/ti_ja/general/eStore/notice_01.page 日本国内に
輸入される評価用キット、ボードについては、次のところをご覧ください。
http://www.tij.co.jp/lsds/ti_ja/general/eStore/notice_01.page
3.3.2 Notice for Users of EVMs Considered “Radio Frequency Products” in Japan: EVMs entering Japan may not be certified
by TI as conforming to Technical Regulations of Radio Law of Japan.
If User uses EVMs in Japan, not certified to Technical Regulations of Radio Law of Japan, User is required by Radio Law of
Japan to follow the instructions below with respect to EVMs:
1. Use EVMs in a shielded room or any other test facility as defined in the notification #173 issued by Ministry of Internal
Affairs and Communications on March 28, 2006, based on Sub-section 1.1 of Article 6 of the Ministry’s Rule for
Enforcement of Radio Law of Japan,
2. Use EVMs only after User obtains the license of Test Radio Station as provided in Radio Law of Japan with respect to
EVMs, or
3. Use of EVMs only after User obtains the Technical Regulations Conformity Certification as provided in Radio Law of Japan
with respect to EVMs. Also, do not transfer EVMs, unless User gives the same notice above to the transferee. Please note
that if User does not follow the instructions above, User will be subject to penalties of Radio Law of Japan.
SPACER
SPACER
SPACER
SPACER
SPACER
【無線電波を送信する製品の開発キットをお使いになる際の注意事項】 開発キットの中には技術基準適合証明を受けて
いないものがあります。 技術適合証明を受けていないもののご使用に際しては、電波法遵守のため、以下のいずれかの
措置を取っていただく必要がありますのでご注意ください。
1. 電波法施行規則第6条第1項第1号に基づく平成18年3月28日総務省告示第173号で定められた電波暗室等の試験設備でご使用
いただく。
2. 実験局の免許を取得後ご使用いただく。
3. 技術基準適合証明を取得後ご使用いただく。
なお、本製品は、上記の「ご使用にあたっての注意」を譲渡先、移転先に通知しない限り、譲渡、移転できないものとします。
上記を遵守頂けない場合は、電波法の罰則が適用される可能性があることをご留意ください。 日本テキサス・イ
ンスツルメンツ株式会社
東京都新宿区西新宿６丁目２４番１号
西新宿三井ビル
3.3.3 Notice for EVMs for Power Line Communication: Please see http://www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page
電力線搬送波通信についての開発キットをお使いになる際の注意事項については、次のところをご覧くださ
い。http://www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page
SPACER
4EVM Use Restrictions and Warnings:
4.1 EVMS ARE NOT FOR USE IN FUNCTIONAL SAFETY AND/OR SAFETY CRITICAL EVALUATIONS, INCLUDING BUT NOT
LIMITED TO EVALUATIONS OF LIFE SUPPORT APPLICATIONS.
4.2 User must read and apply the user guide and other available documentation provided by TI regarding the EVM prior to handling
or using the EVM, including without limitation any warning or restriction notices. The notices contain important safety information
related to, for example, temperatures and voltages.
4.3 Safety-Related Warnings and Restrictions:
4.3.1 User shall operate the EVM within TI’s recommended specifications and environmental considerations stated in the user
guide, other available documentation provided by TI, and any other applicable requirements and employ reasonable and
customary safeguards. Exceeding the specified performance ratings and specifications (including but not limited to input
and output voltage, current, power, and environmental ranges) for the EVM may cause personal injury or death, or
property damage. If there are questions concerning performance ratings and specifications, User should contact a TI
field representative prior to connecting interface electronics including input power and intended loads. Any loads applied
outside of the specified output range may also result in unintended and/or inaccurate operation and/or possible
permanent damage to the EVM and/or interface electronics. Please consult the EVM user guide prior to connecting any
load to the EVM output. If there is uncertainty as to the load specification, please contact a TI field representative.
During normal operation, even with the inputs and outputs kept within the specified allowable ranges, some circuit
components may have elevated case temperatures. These components include but are not limited to linear regulators,
switching transistors, pass transistors, current sense resistors, and heat sinks, which can be identified using the
information in the associated documentation. When working with the EVM, please be aware that the EVM may become
very warm.
4.3.2 EVMs are intended solely for use by technically qualified, professional electronics experts who are familiar with the
dangers and application risks associated with handling electrical mechanical components, systems, and subsystems.
User assumes all responsibility and liability for proper and safe handling and use of the EVM by User or its employees,
affiliates, contractors or designees. User assumes all responsibility and liability to ensure that any interfaces (electronic
and/or mechanical) between the EVM and any human body are designed with suitable isolation and means to safely
limit accessible leakage currents to minimize the risk of electrical shock hazard. User assumes all responsibility and
liability for any improper or unsafe handling or use of the EVM by User or its employees, affiliates, contractors or
designees.
4.4 User assumes all responsibility and liability to determine whether the EVM is subject to any applicable international, federal,
state, or local laws and regulations related to User’s handling and use of the EVM and, if applicable, User assumes all
responsibility and liability for compliance in all respects with such laws and regulations. User assumes all responsibility and
liability for proper disposal and recycling of the EVM consistent with all applicable international, federal, state, and local
requirements.
5. Accuracy of Information: To the extent TI provides information on the availability and function of EVMs, TI attempts to be as accurate
as possible. However, TI does not warrant the accuracy of EVM descriptions, EVM availability or other information on its websites as
accurate, complete, reliable, current, or error-free.
SPACER
SPACER
SPACER
SPACER
SPACER
SPACER
SPACER
6. Disclaimers:
6.1 EXCEPT AS SET FORTH ABOVE, EVMS AND ANY WRITTEN DESIGN MATERIALS PROVIDED WITH THE EVM (AND THE
DESIGN OF THE EVM ITSELF) ARE PROVIDED "AS IS" AND "WITH ALL FAULTS." TI DISCLAIMS ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, REGARDING SUCH ITEMS, INCLUDING BUT NOT LIMITED TO ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF ANY
THIRD PARTY PATENTS, COPYRIGHTS, TRADE SECRETS OR OTHER INTELLECTUAL PROPERTY RIGHTS.
6.2 EXCEPT FOR THE LIMITED RIGHT TO USE THE EVM SET FORTH HEREIN, NOTHING IN THESE TERMS AND
CONDITIONS SHALL BE CONSTRUED AS GRANTING OR CONFERRING ANY RIGHTS BY LICENSE, PATENT, OR ANY
OTHER INDUSTRIAL OR INTELLECTUAL PROPERTY RIGHT OF TI, ITS SUPPLIERS/LICENSORS OR ANY OTHER THIRD
PARTY, TO USE THE EVM IN ANY FINISHED END-USER OR READY-TO-USE FINAL PRODUCT, OR FOR ANY
INVENTION, DISCOVERY OR IMPROVEMENT MADE, CONCEIVED OR ACQUIRED PRIOR TO OR AFTER DELIVERY OF
THE EVM.
7. USER'S INDEMNITY OBLIGATIONS AND REPRESENTATIONS. USER WILL DEFEND, INDEMNIFY AND HOLD TI, ITS
LICENSORS AND THEIR REPRESENTATIVES HARMLESS FROM AND AGAINST ANY AND ALL CLAIMS, DAMAGES, LOSSES,
EXPENSES, COSTS AND LIABILITIES (COLLECTIVELY, "CLAIMS") ARISING OUT OF OR IN CONNECTION WITH ANY
HANDLING OR USE OF THE EVM THAT IS NOT IN ACCORDANCE WITH THESE TERMS AND CONDITIONS. THIS OBLIGATION
SHALL APPLY WHETHER CLAIMS ARISE UNDER STATUTE, REGULATION, OR THE LAW OF TORT, CONTRACT OR ANY
OTHER LEGAL THEORY, AND EVEN IF THE EVM FAILS TO PERFORM AS DESCRIBED OR EXPECTED.
8. Limitations on Damages and Liability:
8.1 General Limitations. IN NO EVENT SHALL TI BE LIABLE FOR ANY SPECIAL, COLLATERAL, INDIRECT, PUNITIVE,
INCIDENTAL, CONSEQUENTIAL, OR EXEMPLARY DAMAGES IN CONNECTION WITH OR ARISING OUT OF THESE
TERMS ANDCONDITIONS OR THE USE OF THE EVMS PROVIDED HEREUNDER, REGARDLESS OF WHETHER TI HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. EXCLUDED DAMAGES INCLUDE, BUT ARE NOT LIMITED
TO, COST OF REMOVAL OR REINSTALLATION, ANCILLARY COSTS TO THE PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES, RETESTING, OUTSIDE COMPUTER TIME, LABOR COSTS, LOSS OF GOODWILL, LOSS OF PROFITS,
LOSS OF SAVINGS, LOSS OF USE, LOSS OF DATA, OR BUSINESS INTERRUPTION. NO CLAIM, SUIT OR ACTION SHALL
BE BROUGHT AGAINST TI MORE THAN ONE YEAR AFTER THE RELATED CAUSE OF ACTION HAS OCCURRED.
8.2 Specific Limitations. IN NO EVENT SHALL TI'S AGGREGATE LIABILITY FROM ANY WARRANTY OR OTHER OBLIGATION
ARISING OUT OF OR IN CONNECTION WITH THESE TERMS AND CONDITIONS, OR ANY USE OF ANY TI EVM
PROVIDED HEREUNDER, EXCEED THE TOTAL AMOUNT PAID TO TI FOR THE PARTICULAR UNITS SOLD UNDER
THESE TERMS AND CONDITIONS WITH RESPECT TO WHICH LOSSES OR DAMAGES ARE CLAIMED. THE EXISTENCE
OF MORE THAN ONE CLAIM AGAINST THE PARTICULAR UNITS SOLD TO USER UNDER THESE TERMS AND
CONDITIONS SHALL NOT ENLARGE OR EXTEND THIS LIMIT.
9. Return Policy. Except as otherwise provided, TI does not offer any refunds, returns, or exchanges. Furthermore, no return of EVM(s)
will be accepted if the package has been opened and no return of the EVM(s) will be accepted if they are damaged or otherwise not in
a resalable condition. If User feels it has been incorrectly charged for the EVM(s) it ordered or that delivery violates the applicable
order, User should contact TI. All refunds will be made in full within thirty (30) working days from the return of the components(s),
excluding any postage or packaging costs.
10. Governing Law: These terms and conditions shall be governed by and interpreted in accordance with the laws of the State of Texas,
without reference to conflict-of-laws principles. User agrees that non-exclusive jurisdiction for any dispute arising out of or relating to
these terms and conditions lies within courts located in the State of Texas and consents to venue in Dallas County, Texas.
Notwithstanding the foregoing, any judgment may be enforced in any United States or foreign court, and TI may seek injunctive relief
in any United States or foreign court.
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2015, Texas Instruments Incorporated
spacer
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products Applications
Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive
Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications
Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers
DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps
DSP dsp.ti.com Energy and Lighting www.ti.com/energy
Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial
Interface interface.ti.com Medical www.ti.com/medical
Logic logic.ti.com Security www.ti.com/security
Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense
Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video
RFID www.ti-rfid.com
OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com
Wireless Connectivity www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2016, Texas Instruments Incorporated